-
Posts
424 -
Joined
-
Last visited
-
Days Won
2
Content Type
Forums
Gallery
Events
Store
Downloads
Collections
Everything posted by gandhi_2006
-
Ha ha you said masshole. Anyway welcome to the site, if i may ask how did you find out about it.
-
So i just got new headlights today and will hopefully be putting them in this weekend. Last weekend i put in my new plugs and wires, i went with nkg one temp colder, and street fire wires. I also put in a CAI and as soon as i put the lamps in i will post pics. I also got new kicker 6x9 and 6.5 speakers and an amp wiring kit so as soon as the dash kit comes i will be putting that in as well. also for the post above this anyone have any suggestions?
-
Sweet, i have always liked Subaru. Cant wait to see what you do to her!
-
I wouldn't spend the money on no2 i would use that money and invest in a supercharger, just save up for a bit.
-
Congratulations man, quite a sweet machine.
-
Very nice!
-
Ok tuner pros, when i go to get my pcm tuned after i put the mods on, what do you guys suggest i have them do. I would like to raise my rev and speed limiters up a little, and tighten my transmissions shifting. Anything else specifically?
-
Ok i will return 3.4 and get 3.8 and the headers.
-
Thanks for the link Dalton, hell even the price they are asking for is a good deal, and because i don't know and would like to what would really make the diff between a 3.4 and a 3.6 pulley on the engine. Why would .2 make that big of a prob on it?
-
1976 Pontiac Trans AM 455 help
gandhi_2006 replied to sinister.poet's topic in Pontiac Performance Discussion/Questions
From the way it sounds you have the right ideas for this ride. Remember the hp you add will also add torque, so just remember the more torque the pressure on the chassis to. -
Thanks ghost he did pm me last night.
-
Don't blame you one bit Sam. Especially one-offs. If you don't mind my asking about how much did you pry your wallet open for the comb lights?
-
Also i did pm 95nasta but he must be busy, does any one know what kind of paint he used on his trans.
-
Ok so here is what i bought so far. 3.4 pulley, gatorback supercharger belt, nkg plugs(one temp colder) mds street fire wires, 180* thermstat, and soon a CAI. i cant seem to find any headers for her yet, and i have found a dynotune shop in mn called MAPerformance.
-
Damn some nice rides there just in the pic.
-
1931 Pontiac 6 Sedan Questions
gandhi_2006 replied to AbsolutPONTIAC's topic in General Pontiac Discussion
That car is hot dude, very nice. If and when you get the info from PHS, would you mind letting us know a little of her history, i love hearing those stories. -
For hand built, i would have to say the comb lights look very sexy. I don't think anyone will notice the bubble unless you point it out. to bad about the less, wish they would have worked, would've loved to see them installed. I don't believe you need a resistor for them, but not knowing the voltage not sure.
-
Possibly not enough power going to them when fully engaged, have you checked voltage on them. Also how much electronics you run may be pulling to much from alternator. I would check that as well. Other than that loose, frayed or pinched wiring.
-
Sweet thanks i will check the sites out. Btw i was wanting to get it dyno tuned soon so i guess that would work fine then.
-
Ok so just so you know i was kidding about the lights! Ha ha. I would like to do a new exhaust with headers, but i cant seem to find any that work with my model. Ive looked on 3800performance, horsepowerfreaks, and carid. It will be a while before i put new exhaust on anyway. So if that's the case what size pully can i put on without having to mess with the pcm? the most i would do is tint the lights i have now after i clean them, i like the lights that are on it.
-
Yep leds with halos
-
Ducati's are freakin nuts dude, very sweet, but nuts. Just be careful bro. Looks sexy nonetheless. Ive ridin on one before, incredible acceleration. I would go as far as being one of the best rockets in the world. Enjoy dude. Take some videos of it.
-
I was planning on smaller pully. Any recommendations on size, i was thinking 3.4.