some work that gone done today

Installed

new air filter

Cargo Light

New Valve Cover Gasket

New PCV set up

Painted Front bumper and skid plate

Other Work done

4WD AX-15 Trans and TC

31's

D30 Front Axle

Its started out as a 2WD when I got it. My spindle went bad bc of the bad wheel bearing so I got a D30 front axle and Started the 4WD conversion. I had some trans/clutch problems so I got a AX-15 5-speed trans and a Np231 TC. It had some major wiring problems mainly worked out now. Clutch is fairly new. All new drive shafts. New valve cover gasket. New clutch Master Cylinder and Slave Valve. Had some thermostat problems(still have). but long story short thats the details on my Comanche

I counted maybe 3 or 4, maybe 5 different brands and tread designs of tires in those pics. Keep in mind with 4WD you need to keep the same tread type all the way around, otherwise it will wreak havoc.

I counted maybe 3 or 4, maybe 5 different brands and tread designs of tires in those pics. Keep in mind with 4WD you need to keep the same tread type all the way around, otherwise it will wreak havoc.

They are all the same

Bf All-Terain T/A

Jeep Comanche Sponsored by...Pepsi.

BGF AT Are the best! That's what I have on my (recently deceased) Ranger 33's on 15's though.

That's what I have on my (recently kaBOOM!) Ranger 33's on 15's though.

Great looking Jeep ya got there, but I'd suggest getting rid of that intake and doing a snorkel

Either you are moving, or taking stuff to the dump? This is how my truck looks currently, as everything is getting thrown in the bed to go to the dump before the move to Texas

Uh.. going back to dads?

Yep

Best of luck and glad to see you two are working things out

We had to or I would have to find my own place

Oh...