Aww shiz... there here and i put them in...

This is what i did...

The first thing i hated was the orange markers so.....

Notice a difference?

well they still burn orange so i am not going to get in trouble from the MAN

The halos were originally attached to the parking lights but i un did that to move the halos to a switch i already had in the car. so i can run them independantly from the lights.

Also if you noticed i have 8K fogs now (the H11s from the old headlights) and now i have 8K in the projectors.

What do you think?

Not bad at all. The G6 has the look for projectors, I approve.

FYI, you can use white bulbs in place of ambers, and it's still 100% legal.

' date='Feb 26 2010, 10:52 AM' post='13535']

Not bad at all. The G6 has the look for projectors, I approve.

FYI, you can use white bulbs in place of ambers, and it's still 100% legal.

I may have to change that. but for now i am going to leave those in.

i would rather have white but i dont want the incondecent "Yellow" light. i want a WHITE so i will have to find an LED

I know what you mean. But running LED's in the turn signals, you'll have to splice in load resistors so they don't blink fast. After that, you might as well go for some LED tails. The ones Mark has are tight. I like the design, I'd tint them and leave the white strip alone.

Looks great!!!

I the black ones are realy growing on me, the chrome ones not so much.

You should get some black or carbon fiber eyelids to cover up that bar on the top.

but all in all they look prefect on your car!!!

Looks great!!!

I the black ones are realy growing on me, the chrome ones not so much.

You should get some black or carbon fiber eyelids to cover up that bar on the top.

but all in all they look prefect on your car!!!

CF Eyelids?!?!?!

Jedi you are a master!

can you haz them made?

and thanks for the compliments. i am going to turtle wax to get a wash and wax so i can take some clean pictures.

All Salute!

Won't it be a bit hard getting a fake CF vinyl strip matching the texture of actual CF?

sorry I cant ask him to buy a hole roll of vinyl for one project. Also he is so slow at getting stuff done you would have a diff car by then. I know Autozone has rolls of fake carbon fiber vinyl you could take a wack at cutting out and making your own.

' date='Feb 26 2010, 08:00 PM' post='13537']

I know what you mean. But running LED's in the turn signals, you'll have to splice in load resistors so they don't blink fast. After that, you might as well go for some LED tails. The ones Mark has are tight. I like the design, I'd tint them and leave the white strip alone.

You can't really tint the LED tails on the G6, it blocks too much light and makes the LEDs unviewable from the side, only from the rear

Looks great!!!

I the black ones are realy growing on me, the chrome ones not so much.

You should get some black or carbon fiber eyelids to cover up that bar on the top.

but all in all they look prefect on your car!!!

Shhhhhh!!! Quit stealing all my ideas No what I plan on doing, and actually have someone working on this now, is taking the inside of the lens, having a template made up, then have a CF board made and glued to the the actual lens, that way I have real CF on the inside of the headlight as an eyelid Trust me, don't do CF vinyl, it just won't look right sitting right next to your real CF hood, been there done that

Those look pretty good! I am with dan go with real CF eye lids if you have a cf hood, they will look off.

nice headlights. keep up the good work!

Those look pretty good! I am with dan go with real CF eye lids if you have a cf hood, they will look off.

Thanks Mark, and it's true! If you want, go to a graphic shop and have them let you take a sample piece of printed CF out to your car, when you see the difference, you will thank me

How is the light output on these headlights

Nice job

Looks real nice.

How is the light output on these headlights

I would imagine quite good, since they are projectors, and the light is more focused.

meh... they are decent at best. honestly the OEM headlights with HIDs are better.

i just need to adjust them but the screws are hidden. they suck to aim correctly