Hello, I am new here and have a modification inquiry regarding the air intake on my 2007 Torrent. I’ve searched high and low for a complete cold air intake kit but thus far have only found one on eBay from a company called BBP. Are there modifications that can be made without purchasing an entire air intake kit? For example, will a standard K&N cone filter work after removing the factory air box? If so, how does one easily remove the factory air box? Any and all assistance is greatly appreciated! Thanks for helping out the new guy!

what motor do you have?

what motor do you have?

let us know the engine, you might be able to use some parts or create a custom CAI or short ram like a member did on here.

this what i used, there is no kit for our Torrents with the 3.4 v6

http://www.cardomain.com/ride/3916134/2006...port-utility-4d

My Torrent has the 3.4 motor. Wish I had a GXP!

By the way, thanks for the welcome emoticons! I just have a stock '07 Torrent, but can't get too outlandish with mods since I have a kiddo.

this what i used, there is no kit for our Torrents with the 3.4 v6

http://www.cardomain.com/ride/3916134/2006...port-utility-4d

Where did you acquire the parts to make your own intake? And would you have the $$$ figures on how much it cost? Thanks!

all the parts came from Autozone and it was about $80

Right on. Thanks. I'm sorry for so many questions, but do you have the measurements for the length of pipe and what size filter you used? I really do appreciate it!

all the parts came from Autozone and it was about $80

i do not, the Autozone is 3 blocks from my house. i biked it there 2 pieces at a time. i know the diameter is 3" all the way