Hi guys I am trying to replace my window trim felts and running into a problem. took the door panel off and rolled the window down to get to the felt.And I tried to loosen the screw that I thought would let me lower the window more to get to the screws but would only come down maybe 1/8th more. They say it should of came of came down as it was suppose to be the screw for the window stop.I felt all around and couldn't feel any kind of stop .Anyone have any tips on where it might be or rhe best way to get the window down another 1/2 inch or so..

Thanks Terry

Hi guys.I am trying to replace my furring trim on my door panels.U tube has shown that you can loosen one of the bolts slide it down some and your windows will drop enough to get at the screws.I have tried that and doesn't seem to work.But does look like if I roll my window up it hits a stop.Wondering if I take the bolt out will the window roll up higher to get at the screws to the strips?

 thanks for any help

Terry

On 6/4/2019 at 9:11 AM, TerryH said:

Hi guys I am trying to replace my window trim felts and running into a problem. took the door panel off and rolled the window down to get to the felt.And I tried to loosen the screw that I thought would let me lower the window more to get to the screws but would only come down maybe 1/8th more. They say it should of came of came down as it was suppose to be the screw for the window stop.I felt all around and couldn't feel any kind of stop .Anyone have any tips on where it might be or rhe best way to get the window down another 1/2 inch or so..

Thanks Terry

I believe at the bottom of the tracks that the window hardware runs in there is an L shaped bracket that has a piece of rubber on the foot (horizontal portion) of the L shaped bracket. That bracket has a bolt that you loosen to adjust it or remove it.