wdl182

Legendary is about 30 minutes away from me!! Let me know how they fit !! Hope all is well, stay safe!!

Thanks Kiwi appreciate the info.

That looks great! I have a problem though, when I put on my high beams after a couple of minutes the circut breaker trips and out go the lights! I hit the dimmer switch and the lows come back on. The circut breaker is built into my aftermarket fuse panel next to the fuse for headlights. I've tried a higher amp breaker, but they still go out? Any thoughts? I'm running Halegon lights

I ordered the bulbs from Amazon and they plug into the original sockets without any problems, they also plug into the aftermarket gauges with no problem either. The original sockets worked in my dash, gas gauge, and clock and the rest in the aftermarket gauges. Also my RetroSound Stereo has over 3000 lighting colors so I was able to tune that in to match the LED's!

I'll take a picture when I get a chance and show, but it was easy! And thanks for comment!!

Not as bright as they look, but working on dimming and don't do alot of night driving unless I have too! Thanks

I used LED's in everything on my dash except for turn and hi-beam! all gauges, clock, and glovebox!

Well I had new Front wheel bearings put on the 64 last Friday and then Saturday took her out for a 100 + mile drive!! Beautiful country side in the Finger Lakes!!

Frosty, were you at Garden City tonight? saw a lot of Pictures on Facebook!!

Frosty, Brake shoes # S242 at CarQuest/Advance Auto $13.08 next day!! For your 1972 Pontiac Lemans with 400 cu in

I don't know where you guys are coming up with these prices? I work for CarQuest and Front Sway Bar Links by MOOG # K80252 are $29.30 each out the door!! This is for a 2009 Malibu with 3.6 motor! Am I missing something?? Stewy for your 2005 Gran Prix Moog # 80852 $26.93 each sway bar links !

Legendary is a good company about a half hour away from me !! Good luck with them.

Wow Frosty that is a huge undertaking !! I basically did the same except I didn't pull the dash !! just chose to squeeze my butt under it !

Man this Virus sucks !! I would love to drive out there just to meet you guys ! but from a distance of course!! Can't get out of New York !!

I've had them in 3 different cars and sound quality is Fantastic !! Highly recommend. You can see mine in previous pictures I posted.

Yes from the 2007 Hot Rod Power Tour !! When I put my first retro I was a little overwhelmed also, but it went together great. It will do almost everything except change your socks. The sound is tremendous in my 64! Good luck with it.

I ordered it on line and it was not precut! had to cut and trim myself using Good scissors ! I'll try to find website for you. okay I got them from Protechcomposites.com they had a sample pack one pound of assorted styles sizes and thickness! which I bought, however looking back I would not recommend because a lot of these I could not use. Go to their site and make your choice. They have a lot of choices, mine was the high gloss version. Your dash is looking good I've always experimented with different finishes! Not a fan of the wood graining! I used a kitchen laminet before in place of the wood grain on a 66 Lincoln Convertible I once owned and got a lot of complements on that! I like to think out side the box. Yes I do and it makes me smile every time I hit the High Beams !!

My wood veneer was toast so I replaced with a Thin Carbon fiber veneer.

Everything is working now !! I've been out driving as much as possible!! When I first got my Bonneville I turned on the headlights and hit the dimmer switch and Chief lit up!! That was the coolest thing I have ever seen !! Still cool to see it.

Not when you put in an after market wiring kit. They just show the basic stock GM ignition wiring. It's just that Pontiac runs so many other circuts thru the ignition switch that it's hard to figure out believe me I tried !!

Well it's really nice driving Martha around with the A/C Working !!😅

I had the same problem with my original ignition switch could not get it wired properly I looked at American Auto wire diagrams and still could not figure it out. Finally used an aftermarket switch that works fine, but pain in the ass to get it to fit in original hole !! But got it !! Don't like the key, but hard to see it ! My question is with all these "so called" wiring gurus out there Why can't someone figure out this common 9 pin switch?

Check The Box !! Stewy is right these things are great!! Used them on my rewiring kit this past winter!! Be careful though the first batch I got would burn thru the plastic and not melt the solder, but I made them aware of the problem and they sent me a new and improved set that worked great! Make sure after use you let them "cure" a bit before you tug on them!

Frosty, You should be very happy with your Retro Sound!! That's all I will use now !!

4th of July !!