This fix was a little long in the making but finally got around to it today. All and all pretty easy, only took 5 minutes and about $30.
Part #: 20940369
Got mine from Amazon: https://www.amazon.com/gp/product/B004940ZNK/
7mm socket Flat head screwdriver Video walk-through (sorry for the angles and dirty car)
Try and transcribe a bit of what happened:
There's 3 bolts on the bottom of the steering wheel column, you'll see the three indentions. Once those are out, just pull apart the cover at the seam On the blinker switch itself there are 2 clips at top and bottom that you'll need to take the flat head screwdriver and push apart. The connectors at the back easily come apart as mentioned in the video. Pinch and pull the smaller of the two where appropriate then use the flat head again on the larger connector to pull it out. Reassemble. All done!
Hi all, I'm new to Forever Pontiac. Anxiously seeking help. (Happy belated Thanksgiving!)
I own a 4 door 2005 Pontiac G6 GT.
Problem: Doors will not lock or unlock from the driver door control panel. Doesn't even make noise or show any attempt to work when clicking the button. The passenger door panel switch does work, but only for the 2 front doors. The rear doors to do not look or unlock unless by hand. Up until an hour ago, the driver door panel was completely useless. It wouldn't allow me to roll the windows up or down, but after messing with the boot/harness/accordian (picture attached) between the door and the car, the windows started to work again.
Question: How do I fix the door so I can unlock/lock my car using my driver door?
I'm not extremely knowledgeable when dealing with cars, so sorry for the lack of proper lingo and what not. Also, if you use any acronyms in response, please provide what they mean in parenthesis. Any help would be much appreciated! Thank you in advance