Skip to content

Rev up your passion for Pontiacs and join our vibrant community of enthusiasts!

Whether you're a die-hard fan of classic muscle cars or you've got a soft spot for sleek modern models, you've found your home here at Forever Pontiac. Our community is dedicated to celebrating everything Pontiac, from the iconic GTO to the legendary Firebird and everything in between.

Unlock access to expert advice, stunning photo galleries, engaging discussions, exclusive events, and more!

Start your Pontiac journey with us today!

Sign up now! šŸ

Help identifying a vintage 1969 Pontiac 400 (#48 heads) valvetrain build!

Featured Replies

I recently opened up a 1969 Pontiac 400 engine with #48 heads (built in the US prior to 2006) and found an interesting vintage performance setup inside. Before sitting in storage, it cleanly pulled past 6,000 RPM.

Rather than guessing, I’d love to get your unbiased expert eyes on the attached photos and parts list. Here are the objective facts:

  • Heads (#48): 1969 D-port castings, machined for larger diameter dual valve springs with dampers and bronze shims underneath, plus metal-clad Viton valve stem seals.

  • Valvetrain: Screw-in rocker studs, pushrod guide plates, stamped steel rocker arms, and a one-piece oil deflector shield mounted over the rockers.

  • Cam & Timing: Double-roller timing chain and a camshaft cast with "1896" and "CMC".

  • Intake & Carb (#9794234): 1969 cast-iron Q-jet intake with the exhaust crossover separated/blocked from the main runners, topped with a re-jetted Holley 4160 (600 CFM).

  • Exhaust (#9779032 / #9779033): 1967 Pontiac D-port HO / Ram Air cast-iron exhaust manifolds.

  • Cooling & Ignition: 11-bolt water pump (#30938 A) with an 8-blade curved stamped impeller, and a GM HEI distributor topped with an ACCEL Super Coil.

Looking at the photos and this combination, what do you make of this build? Does any of the valvetrain hardware or overall recipe look like a specific vintage kit or shop build, and what kind of bottom-end setup would typically have been paired with a top end like this?

Thanks in advance for any insight!


01.jpg

02p.jpg

03p.JPG

04p.jpg

05p.jpg

Create an account or sign in to comment

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.