Jump to content
Forums Gone... but not forgotten!
Pontiac of the Month

Shakercars's 1972 Trans Am

2019 August
of the Month

  • Welcome!

    Welcome to Forever Pontiac, full of great ideas for Pontiac performance, maintenance, or for peer-to-peer assistance from Professional and DIY mechanics. Also, compete in our Pontiac monthly competitions. Please register if you'd like to take part.

Sign in to follow this  
60DegreeVVT

Started the LED Swap

Recommended Posts

So. I had a few lights burn out (fog light button and part of the HVAC) so I decided that I was going to swap out the burnt out RED for the BLUE!!!

Here are some progress shots.

First Stop : Dimmer and Fog Lights

IMG_0692.jpg

Second Stop : HVAC

IMG_0691.jpg

Next i am on to the DOOR CARDS!!! um how do i get the window switches out? Any Help?

Share this post


Link to post
Share on other sites

Tired of these Ads? Register Today!

Looks real good! I really like the HVAC

Ghost would be the best person to ask on the window switches because he's done it lol

Share this post


Link to post
Share on other sites

Good job! but im still in love with the red lights. sorry but like I said good job and it dosent look bad, just I love the red.

Share this post


Link to post
Share on other sites

Worked on the cluster....

IMG_0706.jpg

IMG_0704.jpg

Radio pic for someone...

IMG_0705.jpg

Share this post


Link to post
Share on other sites
Ghost is the best person...

you are correct sir! :lol: it does look good. PM in a bit.

Share this post


Link to post
Share on other sites

looks sick ryan. long time no talk!

Share this post


Link to post
Share on other sites

looks sick ryan. long time no talk!

yea bud... it has been some time. we should make sure to catch up! how has the goat been?

Share this post


Link to post
Share on other sites

Looks great! Did you just solder in new LED's or what did ya have to do?

Share this post


Link to post
Share on other sites

what size LEDs are you using? how come your HVAC blues look kinda like frosted blue and not like your first one?

and got you some pics:

you pop this one out like so...

L1.jpg

L2.jpg

pull it out as much as possible, which isnt much (its more than shown in pics).

L3.jpg

then the outter piece is snapped in from the sides. unhook and pull up.

L4.jpg

then the switch section is snapped in from the front and rear. unhook and pull up.

L5.jpg

and now you have the open area to work with. when you put it back together, separate the switch cover from the boxy piece and install the boxy piece first. that way you can see if anything gets crushed or moved. you can also test the switch cover on it without the boxy piece for movement and hitting. this works for all except drivers section.

now the drivers section. remove cover.

L6.jpg

undo these...

L7.jpg

then snap off in various sections.

L8.jpg

then pull out. (no more pics). when you do this, you will need to take off the mirror buttons. those two are together. then you take off the rest, its one big piece. its all snapped on. then you carefully remove the whole black cover piece from the circuit board and stuff but it doesnt come off easy (well it didnt for me, it would hold on towards the back near the window lock). once its off you can work on it on a table and test it by placing the board on its plug. time consuming.

Share this post


Link to post
Share on other sites

NICE!!

Share this post


Link to post
Share on other sites

NICE!!

thank you, thank you. i try. :lol:

Share this post


Link to post
Share on other sites

so... did you light up your rear switches? i know there was a way to do it but i forgot.

Share this post


Link to post
Share on other sites

L8.jpg

I spy a blurry screwdriver and 2 cans of AXE body spray :lol:

Share this post


Link to post
Share on other sites

I spy a blurry screwdriver and 2 cans of AXE body spray :lol:

:lol: yes. i keep forgetting to throw them out. empties. im lazy. also, do you want me to merge this with your other progression, 60*? and here you go...

If you want the window switches on the back doors to light up this is how

(note they only light up when the back windows are unlocked)

first get some wire(speaker wire works) and cut 4 short pieces about 2-3 inches

The rear window switches already have the lights in them (you just have to hook them up)

and connect the wires like this in the diagram

windowswitchdiagram.jpg

It should look like this (i just pushed the wires down in the socket)

100_2410.jpg

Then you will have a window switch that lights up

100_2414.jpg

Enjoy if they don't light up try unlocking the windows cause they will only light up when the rear windows are unlocked.

Share this post


Link to post
Share on other sites

been a few days. update? :) what do you think of the gauge cluster in all blue for my car?

Share this post


Link to post
Share on other sites

yea bud... it has been some time. we should make sure to catch up! how has the goat been?

its been devouring gas as usual lol. needs moar headers and cam tho...

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

Tired of these Ads? Purchase Enhanced Membership today to remove them!
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.