Jump to content
Forums Gone... but not forgotten!

Tired of these Ads? Register Today!

  • Welcome to Forever Pontiac

    Welcome to Forever Pontiac, full of great ideas for Pontiac performance, maintenance, or for peer-to-peer assistance from Professional and DIY mechanics. Also, compete in our Pontiac monthly competitions. Please register if you'd like to take part.

Recommended Posts

Tired of these Ads? Register Today!

Since it will not be obtained, its irrelevant if it would or wouldnt.

However, if it was spotted for sale and I had the funds, I wouldnt question if it fits or not. Id buy it and make it fit. If not, I got a rare piece of property.

Share this post


Link to post
Share on other sites

Visually it looks feasible, might have to shift some things around.

If its as rare as it sounds doesn't sound like you'll be getting one for cheap though.

Share this post


Link to post
Share on other sites

Hmmm...the LZ4 is setup in a similar manner...

Honestly, I'd ask over on 60degreeV6.com, that's your best bet. Also, a fabricator is over there, he runs 60inclusive.com, and specializes in 60*V6 custom fabrication parts, including headers, custom heads, etc. His SN on there is Forced_Firebird.

Share this post


Link to post
Share on other sites

He's also on FullThrottleV6 right?

Share this post


Link to post
Share on other sites

Yes. But 60degreeV6.com is more catered to our engine family.

Share this post


Link to post
Share on other sites

i asked over there chaos one guy said our motors need a bigger s/c so idk

Share this post


Link to post
Share on other sites

i asked over there chaos one guy said our motors need a bigger s/c so idk

I remember that thread. The supercharger could be port and polished, maybe even bored out, and larger screws inside for a bit more boost. This is the only roots style supercharger for the 60*V6s.

Share this post


Link to post
Share on other sites

Crimson - the blower is not hard to find... The rear collection housing (lets call it) is the hard part. Eaton also sells the extended snout.

Chaos - do you think a vortec style one could fit where the factory airbox sits? (where the CRAB unit would go? That would just require a bracket to be fabbed/milled. Then run it with no intercooler, just straight in.

Killiger - thanks for asking over there... Want to post a linky?

Also, does anyone think that there will ever br a FI 60* motor on the epsilon platform?

Share this post


Link to post
Share on other sites

If only we had some room between the engine and the hood. I bet hacking the intake mani, and welding in a s/c plate wouldnt be to hard.

Share this post


Link to post
Share on other sites

If only we had some room between the engine and the hood. I bet hacking the intake mani, and welding in a s/c plate wouldnt be to hard.

yeah for sure. a guy on fieroboards used an lz4 and hacked the intake mani and made his own SC onto it. but of course he has more room. the MOTOR isn't the un-boostable, its the car and the motor that makes the combo difficult.

Share this post


Link to post
Share on other sites

http://60degreev6.com/forum/showthread.php...m-NEW!!!

theres the answer i got from two guys

Chaos - do you think a vortec style one could fit where the factory airbox sits? (where the CRAB unit would go? That would just require a bracket to be fabbed/milled. Then run it with no intercooler, just straight in.

ive axctually thought of tht i think ud get more power and we need to consider the big problem....the trans i mean unless u got the heavy duty one that is made for the GP on zzp or something like that ours cant hold the power

Share this post


Link to post
Share on other sites

RSM made a centrifugal supercharger for the L82/LG8/LA1 motor, I don't see how those could not work...

Although the blower's internals need to be rebuilt. IE, new bearings. They're notorious for failure. Other than that, they've been trouble free. With an IC and tune, you're looking at a 85-95HP gain, which is A LOT for any 60*V6 motor.

Share this post


Link to post
Share on other sites

If only we had some room between the engine and the hood. I bet hacking the intake mani, and welding in a s/c plate wouldnt be to hard.

You could always go with the CF hood I had, and if you don't like the CF look, just paint it. It gave you about 4 more inches under the hood :)

Christ just throw a small turbo on and call it even.

Extremely hard, as tuning is a biatch :D

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

Tired of these Ads? Purchase Enhanced Membership today to remove them!
×

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.