Jump to content
Forums Gone... but not forgotten!

Tired of these Ads? Register Today!

  • Welcome to Forever Pontiac

    We are a community of Pontiac enthusiasts. The purpose of our community is to keep alive the Pontiac spirit by sharing (or showing off) our cars, discussing Pontiac, helping each other work on our cars and find information, plus attend various meets/shows/etc... To aid discussion, sharing, event planning and selling of parts/cars/anything, we have various parts of the website to aid this from Forums to an online Garage to Classifieds to even a Document Download Repository. You can find links to these in our navigation above based on what each section helps with (discussion, local events, learning, etc...).

    We invite you to contribute, find help or just view some of our member's amazing cars! Don't forget, we also have great contests from time to time (like our Pontiac of the Month and yearly calendar contest) and our Pontiac This OR That, a fun game where you choose the best of two randomly selected Pontiacs from our online garage.

    We look forward to seeing you around!

64GoatGirl

Manifold Edelbrock not lining up with heads

Recommended Posts

Howdy, I am working on rebuilding a 1972 455 engine to drop into a 1964 frame. We bought an Edelbrock intake manifold and the bolt holes are not lining up.  Should we look at making the bolt holes bigger in the intake manifold or would loosening the head bolts give us any additional wiggle room to work with?

Share this post


Link to post
Share on other sites

Tired of these Ads? Register Today!

I've had this issue before and tried to fix it the wrong way, by enlarging the bolt holes. The problem when you do that is the intake runners are not left matching the head ports and flow suffers. It may also leak. I found that my block had been decked and my heads cut to straighten everything out in my last rebuild. The solution is to have the manifold cut to allow it to fit properly. There is a chart that shows how much to cut off the intake based on how much was cut off the rest. I'll see if I can find the chart. Unless you had that motor since new, and its never been apart would you know if a critical dimension has changed? Head gasket change could even cause issues.

Check out this. http://www.wallaceracing.com/calc-intake-mill.php

 

Share this post


Link to post
Share on other sites

Thank you.  Yes we chatted about enlarging the holes but we were a 1/4 inch off and that was too much for an adjustment.  Turns out our Valley Pan was getting in the way of the Intake Manifold. So hoping that we can adjust the Valley Pan enough to seat the intake manifold. Fingers crossed.  

It is a continuous learning process..........

Cheers~
JA

 

Share this post


Link to post
Share on other sites

What intake are you using?

Share this post


Link to post
Share on other sites

Edelbrock Performer.

Share this post


Link to post
Share on other sites
On 10/2/2018 at 11:45 PM, 64GoatGirl said:

Thank you.  Yes we chatted about enlarging the holes but we were a 1/4 inch off and that was too much for an adjustment.  Turns out our Valley Pan was getting in the way of the Intake Manifold. So hoping that we can adjust the Valley Pan enough to seat the intake manifold. Fingers crossed.  

FYI...  Unless you're doing it to save weight, that Performer is not going to "out perform" the factory cast iron manifold, especially on a 455 that normally won't see the north side of 5000 rpm often.  You might spend some time looking at Cliff Ruggle's (QJet master) and the real world testing he has done.  Here's a link to a post he wrote on his web site:
https://cliffshighperformance.com/simplemachinesforum/index.php/topic,511.msg2231.html#msg2231

Bear

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Tired of these Ads? Purchase Enhanced Membership today to remove them!
×

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.